Owner's Manual

Main features
• 22 FRS Channels • Output power: ≤2W (channels 1-7and 15-22)
• 12 NOAA Weather Channels • NOAA Weather Scan
• 2 Channels Watch • Privacy Codes Scan and Store
• Channel Monitor • Channel Scan Function
• 155 Privacy Codes (50 CTCSS codes/ 105 DCS codes) • 10 Selectable Call Alerts
• Hands-Free Operation (VOX) • Call Alert
• Roger Beep Tone • Keypad Lock
• Battery Level Meter • Emergency Strobe Light
• Battery/Power Saver • Backlit LCD Display
• Low Battery Audible Alert • TOT (Time out timer)
• 2pin Kenwood headset jack • Type-C USB connector for charging
• Li-Ion 1500mAh battery pack • Keystroke Tones
• Up to 5 km range* • Battery Life: up to 18 hours (under typical use conditions)
*Range may vary depending on environmental and/or topographical conditions.
Installation of Accessories
Installing and Removing Belt Clips
With the belt clip, you can easily attach the radio to the belt. However, the belt clip must be removed to install or replace the
battery.
To remove the belt clip, follow the illustration. Fasten the clip into the slot on the unit in the radio's rear rail until it snaps
into the square.