Owner's Manual

1) Connect the included AC adapter with Type-C USB connector cable to the radio's Type-C USB port. Connect the other end
to an outlet that provides USB charging power (NOT to a USB hub).
2) Charge the batteries for 6 hours until the battery indicator either stops flashing.
Using the Charging Cradle
1) Connect the included AC adapter with USB connector cable to the charging cradle's Type-C USB port. Connect the other
end to a standard AC wall outlet.
2) Set the charging cradle on the desk or tabletop, and place the radio in the charging cradle with the keypad facing forward.
3) Charge the batteries for 6 hours.
Note:
• Use only the supplied batteries, charger, and AC adapter or approved accessories.
• Charge time may vary depending on the battery life remaining.
• The batteries must be installed for the unit to operate, even if the unit is also connected to external power.
• If battery power is low, you cannot operate the radio even using external power. Allow the batteries to charge before using.
*If you try to transmit while power is low, the radio will automatically turn off.
Warning: Do not charge alkaline batteries. The radio will not be used for a long time, please take out and keep the
battery properly.
Using the Radio Battery Level and Low Battery Alert
This radio has a Battery Level Meter that shows the battery power level. The greater the number of bars visible, the
stronger the battery level. When the battery level is low, the Battery Shell icon will flash in the display indicating your
batteries should be replaced or recharged if using a rechargeable battery pack.
Warning! To avoid the risk of personal injury or property damage from fire or electrical shock, only use accessories
specifically designated for this product.