Owner's Manual

Model setting is displayed. Then press the or buttons to make the Emergency Alert Model selections. To confirm,
press the [PTT] button or press the
button to move to the next feature setting.
NOTE: The following three options can be selected:
- OFF: means to close the alarm function;
- 1. Means local alarm, sounds alarm through your radio speaker only
- 2. Means broadcast alarm, transmits a cycling tone over-the air.
5. Keypad Silent Operation
Your radio has a keypad silent operation mode. In this mode, all “keypad beeps” and “tones” are disabled. To set the keypad
silent operation, press the
button until the display shows a “bP” icon. Select “on” or “oF” by pressing the or
buttons and push the [PTT] key or button.
6. Roger Beep (end of transmission) TONE
When the [PTT] button is released, the radio will beep to confirm to other users that your transmission has finished. To turn
the ROGER BEEP tone on, press the
button until the display shows a “rb” icon while on the right of the “rb” display, an
“oF” icon appears. Select “on” by pressing the or buttons and push the [PTT] key, or press the button to
move to the next feature setting. To turn the ROGER BEEP tone off, press the button until the display shows a “rb” icon
while on the right of the “rb” display, an “on” icon appears. Select “oF” by pressing the
or buttons and push the
[PTT] key, or press the button to move to the next feature setting.
7. Dual Watch Function
Your radio has a DUAL WATCH function, to enable user to scan 2 channels for any activity. The first channel will be the
current channel setting and the second channel will be the selected channel on the . To turn the DUAL WATCH on, press
the button until the “oF” icon appears blinking on the left of the display, while the “dU” icon appears on the left. Select
the second channel by pressing the or button. Press the button again and the or buttons to
choose the Privacy Code (oF/dc/ct). Then press the button again and the or buttons to set the Privacy