Owner's Manual

Code. Pls. note that the Privacy Code can be set only on Ch 1~22. To confirm, press the [PTT] button or the button. The
DW icon appears, the current channel and the watch channel flash alternately, indicating that the DUAL WATCH function is
turned on, and the radio will start scanning the currently used channel/code and watch channel/code, and stop on any active
channel. Your radio will resume scanning after 4 seconds when the channel is no longer active. When you press the [PTT]
button to transmit on an active channel, the scanning function will stop and remain on the active channel for 10 seconds
before resuming scan when the [PTT] button is no longer pressed. To turn the DUAL WATCH function off, press the [SCAN]
button.
Appendix A. – Technical Specifications
Channels 22 FRS/12 Weather
Sub-Codes 50 CTCSS Tones/ 105 DCS Codes
Frequency Range FRS
Operation Voltage DC 3.7 V ±10%
RF Output Power 2W (FRS)
FM Modulation 11K0F3E@12.5KHz
Adjacent Channel Power 60dB @ 12.5KHz
Transmission current ≤1000mA
NOTE: All specifications may be modified without prior notice or liability.