Owner's Manual
If the or button is locked, please press and hold the button for 2 seconds to unlock. Press the or
buttons to select one of the 22 FRS channels.
Note: You can check the FRS channel transmission activity status through the icon. On 1-7 and 15-22 channels, it is
high-power transmission and
icon is displayed. On 8-14 channels, it is low-power transmission and icon is
displayed.
3. Keypad Lock
To avoid accidentally changing the radio settings, press the
button for 2 seconds. The icon will appear on the display.
[PTT], [MOIN] and [CALL] will still be active. Repeat the same procedure to unlock the keypad.
4. Talking on Your Radio
To talk to others using the radio:
(1) Press and hold the [PTT] button and speak in a clear, normal voice about 2-3 inches away from the microphone. While
you are transmitting, the TX icon appears on the display. To avoid cutting off the first part of your transmission, pause
slightly after pressing the [PTT] button before you start talking.
(2) When you have finished speaking, release the [PTT] button. You can now receive incoming calls. While receiving, RX
displays.
5. Monitor Mode Feature
Your radio allows you to listen for weak signals on the current channel at the press of a key. To turn ON Monitor mode: Press
and hold
button for 2 seconds until two beeps sound. The receiver circuit stays open, and both noise and weak signals
can be heard. The RXicon blinks. To turn OFF Monitor mode: Press and hold
button for 2 seconds to return to
"Normal" mode; two beeps sound and the RX icon stops blinking and disappears.
6. Channel Scanning
Your radio can scan all 22 channels for activity. To enter, quickly press the [SCAN] button. Repeat the same procedure to exit.