User's Manual

WARNING!
Just because you can program in a channel does not mean you're automatically authorized to use that frequency. You may
be tempted to use FRS, GMRS, MURS and PMR(in EU) frequencies. Do note however that there are restrictions on these
bands that make this transceiver illegal for use. Contact your local regulatory body for further information on what laws,
rules and regulations apply to your area.
5.6 Channel (MR) mode
The use of Channel (MR) mode is dependent on actually having programmed in some channels to use.
Once you have channels programmed and ready, you can use the ▲ and ▼ keys to navigate between channels.
Chapter6. Advanced Features
6.1 Frequency scanning
This function can scan the frequency.
a. In frequency mode, press [*/scan] key for more than 2 seconds. The radio will start scanning the frequency according to
the set frequency step.
b. You can change the scanning direction with the ▲ and ▼ keys.
c. Press any key to stop the scanning.
Note: for Scan mode, see Menu No.18.
6.2 Channel scanning
This function can scan the channels.
a. In channels mode, press [*scan] key for more than 2 seconds. The radio will start scanning according to the channel you
set.