User's Manual

a. Change from Menu to Menu by pressing the [EXIT] key.
b. Set radio to VFO Mode by pressing [VFO/MR]
Channel number at the right will disappear.
c. [MENU] [2][8] [MENU] [1] [0] [MENU] [EXIT] Deletes Prior Data in channel (Ex. 10)
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT] Selects desired TX encode tone
e. Enter RX frequency (Ex. 432000)
f. [MENU] [2][7] [MENU] [1][0] [MENU] Enter the desired channel (Ex 10)
-->>[EXIT] RX has been added
g. Enter TX frequency (Ex. 437000)
h. [MENU] [2][7] [MENU] [1][0] [MENU] Enter the same channel (Ex 10)
-->> [EXIT] TX has been added
i. [VFO/MR] Return to MR Mode. Channel number will re-appear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX = 436.000 MHz
TX CTCSS tone 123.0
a. Change from Menu to Menu by pressing the [EXIT] button.
b. Set radio to VFO Mode by pressing [VFO/MR]
Channel number at the right will disappear.
c. [MENU] [2][8] [MENU] [1] [0] [MENU] [EXIT] Deletes Prior Data in channel (Ex. 10)
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT] Select desired TX encode tone (Ex 123 CTCSS)
-->>Use [A/B] to select Upper display
e. Enter RX frequency (Ex. 436000)
f. [MENU] [2][7] [MENU] [1][0] [MENU] Enter the desired channel (Ex 10)