User's Manual

• BOTH: the code is sent when you press and release the PTT
Note: select ‘OFF’ when using in case of affecting the radio.
(21) PTT ID delay (PTT-LT) - MENU No.20
In this MENU you can set the delay time (0-30ms) sending the PTT-ID.
Note: select ‘0’ in normal using.
(22) Channel A Display Mode (MDF-A) - MENU No.21
This function is used to set the display mode of channel A.
Display modes:
• FREQ.: Frequency + channel No. • CH: Channel number
• NAME: Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(23) Channel B Display Mode (MDF-B) - MENU No.22
This function is used to set the display mode of channel B.
Display modes:
• FREQ.: Frequency + channel No. • CH: Channel number
• NAME: Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(24) Busy Channel Lock (BCL) - MENU No. 23
When this function is on, it may prevent other radios’ interference. If the selected channel is being used by other radios,
when you press key PTT, your radio cannot transmit.
Release the PTT and transmit as soon as the frequency is no longer busy.