User's Manual

(25) Auto Keypad Lock (AUTOLK) - MENU No.24
When this feature is activated, the keypad will be automatically locked after 15s; this prevents accidental pressure of any keys.
(26) Frequency offset direction (SFT-D) - MENU No.25
Using this function, you can set the direction of the frequency offset in rx and tx.
You have the following options:
+: Positive offset;
-: Negative offset;
OFF: no offset
Note: you should set different frequency deviation according to the repeaters selected. This function is not enabled in
channel mode.
(27) Frequency offset (OFFSET) - MENU No. 26
In this MENU you can set the deviation between tx and rx. The frequency offset of this radio is 0-69.990MHz.
(28) Channel store - (MEM-CH) - MENU No. 27
When the radio is in frequency working mode or standby mode, input the desired frequency or parameters directly.
To set a CTCSS tone or a DCS code in tx or rx on the stored channel, refer to paragraphs MENU 10-13
Note: You cannot overwrite a stored channel; you have to delete it first. See following paragraph No.28.
(29) Channel Delete (DEL-CH) - MENU No.28
In this menu you can delete a channel of the radio.
(30) Standby backlight (WT-LED) - MENU No.29