Specifications

15 ANI-ID - Automatic Number ID Baofeng UV-5R
Appendix B. Menu definitions 53
Key Values Notes Default value
2 CHI Chinese
0 OFF
In some versions of the firmware your options may be restricted to ON and OFF.
15 ANI-ID - Automatic Number ID
This can only be set via Computer Linked programming.
Values Notes Default value
80808
16 DTMFST - DTMF tone of transmit
code
Selects if you should send your S-CODE(DT) or ANI code with the PTT-ID.
Key Values Notes Default value
1 DT-ST S-CODE only DT+ANI
2 ANI code onlyANI-
ST
3 DT+ANI Both
0 OFF
You cannot set DTMFST while in channel/memory mode.
17 S-CODE - Signal Code
S-CODE sets your transceiver to one of the fifteen(15) group ID codes. The actual ID
codes are only settable from a computer.
Values Notes Default value
1 - 15 1
You cannot set S-CODE while in channel/memory mode.
18 SC-REV - Scanner Resume Method
Sets the behaviour of the scanner upon finding active frequencies.
Determines when DTMF Side Tones can
be heard from the transceiver speaker.
Side Tones are
heard only from
manually keyed
DTMF codes
Side Tones are
heard only from
automatically
keyed DTMF
codes
No DTMF Side
Tones are heard
All DTMF Side
Tones are heard
Transmitted when AL-MOD=CODE
and the ALARM is triggered
Can only be edited
with software