Specifications

The (Chinese) Radio Documentation Project
54 Menu definitions
Key Values Notes Default value
0 TO Time Operation TO
1 CO Carrier Operation
2 SE Search Operation
• Time Operation: The scanner will resume after a pre set time.
• Carrier Operation: The scanner will resume once the signal disappears.
• Search Operation: The scanner holds on the frequency with detected activity.
19 PTT-ID - When to send the PTT-ID
Sets when to send the PTT-ID (ANI and/or S-CODE) code(s).
Key Values Notes Default value
1 BOT Beginning Of Trans-
mit
OFF
2 EOT End Of Transmit
3 BOTH Both BOT and EOT
0 OFF
You cannot set PTT-ID while in channel/memory mode.
20 PTT-LT - Signal code sending delay.
Delay before sending the PTT-ID.
Values (ms) Notes Default value
0 - 30 5
21 MDF-A - Channel Mode A Display
Sets the display mode for the upper display.
Key Values Notes Default value
0 CH Channel number FREQ
1 NAME Channel name
2 FREQ Frequency
Channel name can only be set via Computer.
Scanning ends
NAME
If there is no 'channel name'
programmed, the 'channel number'
is shown
frequency/channel
factory fixed