User's Manual

6.4 Cursor▼▲Conversion (A/B)
6.5 High/low power fast selection
6.6 Keypad lock
6.7 FM Radio (FM)
6.8 Flashlight
6.9 1000Hz, 1450Hz, 1750Hz Tone-burst
6.10 Manual Programming (Channels Memory)
6.11 Repeaters Programming
7. WORKING THE MENU SYSTEM
7.1 Basic use
7.2 Using short-cuts
7.3 Functions and operations
(1) Squelch level (SQL) - MENU No.0
(2) Step frequency (STEP) - MENU No.1
(3) Output power (TXP) - MENU No.2
(4) Battery save (SAVE) - MENU No.3
(5) VOX Function (VOX) - MENU No.4
(6) Wide/Narrow bandwidth (WN) - MENU No.5
(7) Backlight (ABR) - MENU No. 6
(8) Dual Watch Operation (TDR) - MENU No. 7
(9) Keypad beep (BEEP) - MENU No. 8
(10) Time-Out-Timer (TOT) - MENU No.9
(11) Receiving DCS (R-DCS) - MENU No.10
(12) Receiving CTCSS (R-CTCSS) - MENU No.11
(13) Transmitting DCS - (T-DCS) - MENU No.12
(14) Transmitting CTCSS (T-CTCSS) - MENU No.13
(15) Voice function (VOICE) - MENU No. 14
(16) ANI-ID (ANI-ID) - MENU No.15
(17) DTMFST (DTMFST) - MENU No.16
(18) Signal code (S-CODE) - MENU No.17
(19) SCAN Resume Mode (SC-REV) - MENU No.18
(20) PTT-ID (PTT-ID) - MENU No.19
(21) PTT ID delay (PTT-LT) - MENU No.20
(22) Channel A Display Mode (MDF-A) - MENU No.21
(23) Channel B Display Mode (MDF-B) - MENU No.22
(24) Busy Channel Lock (BCL) - MENU No. 23
(25) Auto Keypad Lock (AUTOLK) - MENU No.24
(26) Frequency offset direction (SFT-D) - MENU No.25
(27) Frequency offset (OFFSET) - MENU No. 26
(28) Channel store - (MEM-CH) - MENU No. 27
(29) Channel Delete (DEL-CH) - MENU No.28
(30) Standby backlight (WT-LED) - MENU No.29
(31) RX backlight (RX-LED) - MENU No. 30