User's Manual

6. ADVANCED FEATURES
6.1 Frequency scanning
This function can scan the frequency.
a. In frequency mode, press [*SCAN] key for more than 2 seconds. The radio will start scanning the frequency according to
the set frequency step.
b. You can change the scanning direction with the ▲ and ▼ keys.
c. Press any key to stop the scanning.
Note: for Scan mode, see Menu No.18.
6.2 Channel scanning
This function can scan the channels.
a. In channels mode, press [*SCAN] key for more than 2 seconds. The radio will start scanning according to the channel you
set.
b. You can change the scanning direction with the ▲and ▼ keys.
c. Press any key to stop scanning.
Note: for Scan mode, see Menu No.18.
6.3 Search CTCSS/DCS Code
With this function you can search and store the CTCSS/DCS code used by other radios.
Procedure:
a. In frequency mode press [MENU]+[1][1].
b. Press [MENU] key again.
c. Press [*SCAN] key; CT will blink on the display.
d. When another radio is transmitting, the display will show the CTCSS/DCS code.
e. After searching the CTCSS code, the radio will beep and stop scanning.
f. After setting, press [MENU] key for confirmation and store, or press [PTT] or [EXIT] key to return to standby mode.
NOTE 1: The DCS scanning has the same procedure of CTCSS code, but you have to select MENU+10 to enter scanning.
NOTE 2: If CTCSS has not searched the code, you can search using the DCS mode.