Specifications

5
Ⅱ. Safety usage, operation, maintenance and service of
forklift truck
It is important for drivers and managers to remember the principle of “first safety”
and ensure the safety operation as the description of Operation & Service Manual.
Please read this manual thoroughly. This will give you a complete understanding of
Baoli forklift truck and you will operate them correctly and safely.
1. Handling a new forklift truck
The performance and service life of the forklift truck depends heavily upon the
way you handle it during the break-in period. Drive with special caution while
becoming familiar with a new forklift truck.
(1) Always warm up your vehicle before putting it to work irrespective of season.
Don’t run engine at high rpm without load needlessly. Operate the vehicle under the
light load, avoid sudden speeding and braking.
(2) Replace gear oil in the differential and reducer after the new forklift truck
working for 100 hours.
(3) Renew the oil in engine oil pan, transmission, driving axle and hydraulic oil
tank; check and readjust the clearance of the driving and driven gear in the reducer
after the new forklift truck working for 200 hours.
2. Inspection before operation
Please pay attention to the following items in order to make the vehicle working
with high efficiency and lengthen its service life.
(1) The forklift truck adopts the home or imported engine, please read the manual
accompanied with the engine carefully when using and maintenance.
(2) Check the tyre inflation pressure, if doesn’t enough, charge air in time. Check
the bolts of all wheels for tightness.
(3) Check the amount of oil in the working oil tank for sufficiency, the position of
lubrication should be lubricated. The oil level should be at the middle position between
the upper and lower scale marks of oil level meter. The contamination level of the
hydraulic oil should be lower than Grade 12.
(4) Check the radiator, and add antifreeze if necessary.