Specifications

99
on.
(5) Backing signal
When you need to reverse the forklift truck, pull the direction switch backward
and the transmission is in reverse gear. Then the backing lamps (white) in the rear
combination lamps are on and the buzzer sounds.
(6) Charging signal
Before you start the engine, put the key switch to the first “on” position and the
charging lamp is on. After engine starting, the charging lamp is automatically off. If the
charging lamp becomes on while the engine is working, it means something is wrong
with the charging circuit and you must stop working and check the charging circuit as
soon as possible.
(7) Oil pressure signal
Before you start the engine, put the key switch to the first “on” position and the oil
pressure alarm lamp is on. After engine starting, the oil pressure alarm lamp is
automatically off. If this lamp becomes on while the engine is working, it indicates low
lubricating oil pressure and you must stop working and check the lubricating system
as soon as possible.
(8) Water separator signal
Before you start the engine, put the key switch to the first “on” position and the
water separator alarm lamp is on. After engine starting, the water separator alarm
lamp is automatically off. If this lamp becomes on while the engine is working, it
means too much water has been accumulated in the water separator. You should
push the handle in the water separator to get rid of the water. After eliminating the
water, this lamp becomes off.
(9) Fuel meter
It indicates how much fuel is left in the fuel tank. If it displays fewer than two bars,
it means little fuel is left in the fuel tank and the buzzer sounds. You should replenish
the fuel tank as soon as possible.
(10) Water temperature meter
It indicates the temperature of the coolant for the engine.
(11) Hour meter
It indicates the working hour of the engine.
The core of LED combined instrument is solid ten-section color LED.(Fig9.4)