Specifications

7
steering operation for its flexibility, tyre pressure for its conformance to the standard. If
there is no trouble, operation may be allowed.
(2) Stop the engine
First set the engine on idle running for five minutes, so as to cool the engine
gradually, and then turn off the ignition switch, so the engine is stopped to work.
Notice：
．While the engine running, does not turn the start switch to “START” position, or it
will damage the starting motor.
．Do not keep the start switch at the “ON” position while the engine is shut down.
This will result in battery discharge.
4. Shipping, loading and unloading, slinging and towing of forklift
truck
(1) Ship the forklift truck
(a) Apply the parking brake when shipping the forklift trucks by container or freight
car.
(b) Fix the mast and the balance weight with steel wire and use jacks to prevent
the forklift trucks from moving in the cabin.
(c) Pay attention to the overall length, width, height when loading, unloading
and shipping and conforming the regulations is necessary.
(d) Single transporting if necessary after disassembling the mast and balance
weight.
Model
Mast
Balance weight
Dimension(mm)
Weight(kg)
Dimension(mm)
Weight(kg)
5T
2300×2005×792
1720
1980×1136×1094
2419
6T
2300×2005×792
1720
1980×1136×1094
2944
7T
2300×2005×792
1720
1980×1136×1174
3524
Notice:
Dismantling and slinging the component shall not be performed without the
approval of our company. Under special circumstances, the appointed sling
position should be used. The balance weight, fork and mast of the forklift truck all