Specifications

15
an elevation of 1000 meters and temperature between -20℃and 40℃, relative humidity
is 95%. Careful operation must observe under other adverse circumstances.
(53) Because of the danger for the people, the forklift is forbidden operating in
airtight space, or you may be choked by the tail gas. The tail gas’s exhausting
standard shouldn’t be lower than the no-load mechanical vehicle exhaust standard
ruled by the nation that users are in. If in Europe nation, the adopted tail gas’s
exhausting index should be applied Europe StageⅢA standard.
（54）According to the Directive 2000/14/EC and based on EN12053 standard，
the noise pressure level at the operator’s position and the measured sound power
level and the guaranteed sound power level is referred to the following table. But the
noise of the forklift truck may fluctuate due to different operation and the influence of
the external environment.
（55）The driver feels the vibration of the forklift truck when operating and
traveling the forklift truck. According to ISO3691 and based on EN13059 standard.
The vibration of the forklift truck fluctuates according to environment condition .In
normal working condition, the vertical direction acceleration mean value from the seat
to the operator by testing is in the following table. But the vibration frequency felt by
the driver depends on the working condition (etc. road, operation method), so the
actual vibration frequency must be determined according to environment condition
when necessary.
(56) To prevent the fire, accident or other unpredictable event, prepare the fire
extinguishers in advance and operate them according to the instructions.
(57) Preventive maintenance services should be done before or after using the
truck. Anytime you find that the truck is not functioning properly, operation of the truck
should be halted and check or repair the trouble.
(58) When operating the machine, observe and follow all markings on the
machine. If the marking is lost, please stick it in time.
Model
The noise pressure
level at the operator’s
position
The measured sound
power level
The guaranteed
sound power level
The vertical direction
acceleration mean
value from the seat
to the operator
EN12053
EN12053
2000/14/EC
CPCD50
85 dB(A)
109 dB(A)
111 dB(A)
1.06 (m/s
2
)
CPCD60
85 dB(A)
110 dB(A)
111 dB(A)
1.08 (m/s
2
)
CPCD70
86 dB(A)
110 dB(A)
111 dB(A)
0.89(m/s
2
)