Specifications

23
Ⅲ. Periodic inspection and servicing
During operating the forklift truck, it is necessary to operate carefully, service and
maintain periodically to make the forklift truck keep in good condition.
1. General rules on inspection and maintenance
(1) Only use genuine parts provided by our company.
(2) Only use genuine or recommended oil when replacing or adding.
(3) Clean oil fillers and grease fittings with a brush or waste cloth before adding
oil or grease.
(4) Checking oil level and adding oil should be made with the truck parked on a
level ground.
(5) Preventive maintenance should be done in an orderly manner and due care
taken not to injure yourself.
(6) If any damage or fault is found, stop the truck and report the condition to the
manager. Do not operate the truck until it has been repaired completely.
．Regular inspection
(1) Check the seal and the reliability of the hydraulic system.
(2) Check the reliability of the steering and braking system.
(3) Check the reliability of mast, driving axle and steering axle connecting with the
frame.
(4) Check all wheels for tightness.
(5) Replace gear box oil (torque converter oil) after working for 500 hours.
(6) Replace the oil of oil tank and drive axle after working for 1000 hours.
．Irregular inspection
(1) Check the reliability of each welding joints of the mast, frame and so on.
(2) Check the reliability of connecting joints of steering cylinder, joint plate and
gimbals etc.
(3) Check all pipes and hoses for any leakage and breakage.
(4) Check the performance of the traveling brake and the parking brake.
Caution:
．Only trained and authorized serviceman shall be permitted to service and
repair the truck.
．When checking and maintaining the forklift truck, do not use the mast or
the load backrest instead of a ladder, these actions will lead to a dangerous
condition unexpectedly.