Specifications

61
4.4 Parking brake
The parking brake is of internal expansion and lining type, and built in the output
shaft of the torque converter transmission.
The operation of the parking brake is shown in Fig.4.7.
When the forklift truck is parked on a slope with standard capacity, the hand
operation force should below 300N. Adjust the pull force by diagrammatic direction.
4.5 Wheel brake (Fig. 4.8)
The wheel brake is the internal expansion and lining type consisting of a pair of
brake shoes, operating cylinder, a adjuster, 3-4 return springs and backing plates. Two
wheel brakes are provided on each end of the front axle. The adjuster adjusts the
clearance between the brake shoes and the inner surface of brake drum.
Fig. 4.7 Parking brake device