Specifications

64
5. Steering system
5.1 General description
Steering system contains mainly a steering hand wheel, a steering column, a
cardan joint, a powered steering unit, a steering axle and a steering cylinder.
The steering shaft is connected with the steering unit and steering hand wheel by
the joint. The steering column may be tilted properly forward or backward. Turn the
hand wheel clockwise, the forklift truck will turn to the right, on the contrary, the truck
will turn to the left.
Main parameter and structure of the steering system sees below:
Item
Parameter & structure
Type
Rear wheel steering powered
Diameter of steering hand wheel
mm
360
Steering
unit
Type
BZZ powered steering unit
Displacement
min
280
Rated pressure
MPa
16
Steering
cylinder
Type
Double-action type
Cylinder dia./Rod dia.
mm
Φ115/Φ85
Stroke
mm
216
Divider
valve
Setting pressure
MPa
12.3
Rated displacement
l/min
25
Steering
axle
Type
Transverse cylinder type
Steering
angle(outside/inside)
79°/50°
Rear tread
mm
1700
Interval of knuckle spindle
mm
1500
Diameter of cardan
mm
Φ42
Wheel
Tire
8.25-15-14PR
Rim
6.50-15
Pressure
KPa
800