User Manual

FAQ

Bar’s Products, 10386 N. Holly Rd., Holly MI 48442 USA
E-mail: [e-mail] Web: www.barsleaks.com Phone: [phone]
FREQUENTLY ASKED QUESTIONS
BAR’S LEAKS ENGINE REPAIR
P/N 1000
How does Bar’s Leaks Engine Repair work?
Engine Repair contains a combination of the best performance additives to repair the most common
oil-related problems. Engine Repair restores lost compression and power, reduces noise and oil
consumption, while improving the performance of worn cylinders, rings, bearings, and seals.
Will Bar’s Leaks Engine Repair clog my oil filter?
No, Bar’s Leaks Engine Repair does not contain any sticky substances that would clog or damage
your oil filter. It works chemically to stop leaks in gaskets and seals.
Will Bar’s Leaks Engine Repair work in synthetic oil?
Yes, Bar’s Leaks Engine Repair is compatible with ALL types of engine oils, including petroleum,
synthetic and high-mileage formulas
Isn’t Engine Oil Enough?
Engine oils are generally used to reduce friction between moving parts. In addition to lubricating, motor
oil must cool, provide corrosion protection and is a method of removing contaminants. As lubricants
degrade, their properties change, leading to increased friction and wear. Over time the natural wear
that occurs inside the engine causes reduced oil pressure, loss of compression (power loss), lower fuel
mileage, oil consumption (leaks & smoking) and noise (knocking & ticking).
Can I add to existing oil?
Yes, remove engine dipstick and check oil level. If oil is low, remove oil cap and install entire contents
of the two chamber bottle. Do NOT overfill. Top off with manufacturers recommended engine oil as
needed. Reinstall dipstick and oil cap. Drive/idle engine for 10-15 minutes.