User's Manual

57
10.7 WiFi Setup
 Wireless LAN: The default setting is “Enable”
 Mode: Specify the WiFi Access Point mode, WiFi Station mode and Concurrent
AP and Station Mode.
< Access Point Mode>
 SSID: You can change the default SSID and the maximum Length is 32 bytes.
 SSID Broadcast: The default value is “Enable”
 Band: 5G or 2.4G
 Channel: You can set a fixed channel or allow auto selection. The “Auto”
selection means after power on wePresent WiPG-2000S, it will scan all of
wireless channels and select one clear channel automatically.
 Encryption: you can select “Disable” or one of WEP/WPA PSK/WPA2 PSK/ WPA
Enterprise/ WPA2 Enterprise.
 Key: If Encryption is enabled, you have to enter a key according to the
encryption mode you selected. (If the length of the key entered is not
sufficient or too long, a warning message will pop up.)
 Channel Bandwidth: select from 20M or Auto (20M/40M)
< Station Mode>
 Connect to Existing AP: The default setting is “Disable”. If you choose “Enbale”