User guide

Baracoda RoadRunners Evolution – User Guide v2.1 - 10 -
Data Capture
for Workforce
in Motion
Configu
ConfiguConfigu
Configuring your scanner
ring your scannerring your scanner
ring your scanner
There are two (2) ways to configure your scanner:
• When connected to a host device, the BaracodaManager software (v3.34 min) can be used for
multiple setting changes.
• The Configuration barcodes In the Programming Guide can be used to configure the scanner without
using outside software applications.
Reset your scanner
Reset your scannerReset your scanner
Reset your scanner
To reset the scanner to its “default settings”, use BaracodaManager software (v3.34 min) or scan the Reset
Configuration barcode.
To reset the RoadRunners Evolution –L & -Laser, please scan only “RESET 1” barcode.
To reset RoadRunners Evolution –Fs (2D Imager), please scan “RESET 1”, then “RESET 2” barcodes.
Reset 1
Reset 2
Security
SecuritySecurity
Security
The Bluetooth connection is secured with a PIN code authentication.
You can configure security (enable/disable/change PIN code) with the BaracodaManager software (v3.34) or
with the Programming Guide.
The Security is enabling by default: default PIN code is 0000.
Symbology
SymbologySymbology
Symbology
You can enable/disable any type of barcode decoders with both the BaracodaManager software (v3.34 min) or
with the Programming Guide.