User guide

Baracoda RoadRunners Evolution – User Guide v2.1 - 12 -
Data Capture
for Workforce
in Motion
Barcode Identifier
Barcode IdentifierBarcode Identifier
Barcode Identifier
The scanner can transmit a maximum of 3 digit barcode identifier codes for different types of barcodes
(symbologies).
If the option is selected, the Barcode Identifier is added at the beginning of the barcode frame.
List of identifier codes can be found in the Programming Guide. You can activate barcode identifier through
BaracodaManager software or with the Programming Guide.
The barcode identifier is disabled in default settings.
Beeps and LEDs
Beeps and LEDsBeeps and LEDs
Beeps and LEDs
You can enable/disable Beeps / LED Lightening using both the BaracodaManager software (v3.34 min) or the
Programming Guide.
P
PP
Power management
ower managementower management
ower management
Mutliple parameters exist to optimize the battery autonomy (“Sniff period”, “Shutdown timer”, etc…)
RoadRunners Evolution is configured at 20dBm (Bluetooth Class.1) by default.
The BaracodaManager software (v3.34 min) can be used for multiple setting changes.
Low battery
Low batteryLow battery
Low battery
An alternation of red and green blinking on the two (2) LEDs indicates that the battery level is low. Recharge
battery immediately. If you continue using the scanner, it will continue working until a triple beep occurs: at
that moment the reader will shut down and you will be forced to charge the scanner.