User guide
Baracoda RoadRun
ners Evolution
Signature capture
Signature captureSignature capture
Signature capture
RoadRunners 2D (from firmware version
defined. Its localisation can be
configured from a referenced barcode (value & symbology(*)).
When this referenced barcode is
scanned ;
treat it as a picture (ie : sent in real time ; or record in its memory).
Configurable parameters :
(*) Reference barcode :
Reference barcode data are the content of barcode serving as reference to the signature area.
This barcode can be one of these symbologies: PDF417, Code 39, Code 128, Aztec, Codabar,
and Interleaved 2 of 5
Aspect Ratio :
It is the
ratio of the bar
X offset :
Horizontal
barcode offset.
area, in multiples of the minimum bar width
Y offset :
Vertical barcode
o
multiples of the minimum bar width. Negative numbers indicate that the signature capture is
above the bar code, and positive numbers indicate that the area is below the bar
Height :
is the hight of signature capture area
Width :
is the width of signature capture area
Signature capture image resolution
This is t
he number of pixels that the scanner outputs per each minimum bar width. The higher
the value for Resolutio
Bit per pixel :
It
indicates the number of bits per pixel in the transmitted image
Note to have in mind :
T
he signature capture area has to be in the
scanner mustn’t be too close as the paper)
ners Evolution
– User Guide v2.1
Signature capture
Signature captureSignature capture
Signature capture
RoadRunners 2D (from firmware version
v1.48) is able to take a picture
of a specific rectangle area previously
configured from a referenced barcode (value & symbology(*)).
scanned ;
the scanner will look at the predefined square ; take the picture &
treat it as a picture (ie : sent in real time ; or record in its memory).
Reference barcode data are the content of barcode serving as reference to the signature area.
This barcode can be one of these symbologies: PDF417, Code 39, Code 128, Aztec, Codabar,
and Interleaved 2 of 5
ratio of the bar
code height to the narrow element width
barcode offset.
The horizontal ratio offset of the center of the signature capture
area, in multiples of the minimum bar width
.
o
ffset,
The vertical offset of the center of the signature capture area, in
multiples of the minimum bar width. Negative numbers indicate that the signature capture is
above the bar code, and positive numbers indicate that the area is below the bar
is the hight of signature capture area
is the width of signature capture area
Signature capture image resolution
:
he number of pixels that the scanner outputs per each minimum bar width. The higher
the value for Resolutio
n, the higher the quality of the image, but also the larger the file size.
indicates the number of bits per pixel in the transmitted image
. (possible value : 1 or 8)
he signature capture area has to be in the
beam area when the Reference Barcode is captured.
scanner mustn’t be too close as the paper)
- 21 -
Data Capture
for Workforce
in Motion
of a specific rectangle area previously
configured from a referenced barcode (value & symbology(*)).
the scanner will look at the predefined square ; take the picture &
Reference barcode data are the content of barcode serving as reference to the signature area.
This barcode can be one of these symbologies: PDF417, Code 39, Code 128, Aztec, Codabar,
The horizontal ratio offset of the center of the signature capture
The vertical offset of the center of the signature capture area, in
multiples of the minimum bar width. Negative numbers indicate that the signature capture is
above the bar code, and positive numbers indicate that the area is below the bar
code
he number of pixels that the scanner outputs per each minimum bar width. The higher
n, the higher the quality of the image, but also the larger the file size.
. (possible value : 1 or 8)
beam area when the Reference Barcode is captured.
(ie: