Manualshelf

User Guide

ManualsBrandsBaratza ManualsCoffee GrinderEncore
12
Rev 15/08/2019 (v3.3)
EN
INITIAL SETUP
For the full manual, visit baratza.com/documentation
1. Hand-wash the hopper lid (1), hopper (2), black silicone gasket (4), and ground
coffee bin (8) in warm, soapy water, and dry thoroughly. Do not wash the
removable ring burr (5) in water or it will rust.
2. Line up the knob (9) (stored in the ground coffee bin (8)) with the stem of the
switch on the right side of the unit and press the knob fully in place. You can
wiggle the knob if you’re having trouble getting it fully seated.
3. The ring burr (5) has a red tab and it should be pointing to grind setting 30
4. Be careful not to tear the gasket. Place the gasket (4) on top of the ring burr (5),
align the gasket notches with the ring burr tabs (one of which is red) and gently
work the gasket down until it is seated on the top ⅛” (4mm) of the ring burr (5).
5. To install the hopper, ensure the silver grind setting indicator (3) is positioned
to the right, and aligned with the silver triangle marker on the case. Press the
hopper down and twist clockwise to setting 20. You should hear the hopper
click as it rotates.
If Step 5 is not working well: The black grind adjustment ring (12) must be
rotated fully counterclockwise for the hopper to install. You can rotate the
grind adjustment ring (12) by using the adjustment ring tabs (13) for leverage,
if needed and then continue from step 3.
Encore™
During normal operation, the coffee tends to mound up in the bin
when being discharged from the grinder. To prevent unnecessary
clogging, empty the ground coffee bin when it is 2/3 of the way full.
®
QUICK START GUIDE
PARTS IDENTIFICATION
1. Hopper Lid
2. Bean Hopper
3. Grind Setting Indicator
4. Black Silicone Gasket
(cut away in 2nd illustration)
5. Removable Ring Burr
6. Grind Adjustment Scale
7. Pulse Button
8. Grounds Bin with Max Fill Line
9. On/Off Knob *
10. Brush *
11. Weighted Base
12. Grind Adjustment Ring
13. Grind Adjustment Tab
14. Burr Alignment & Lifting Tabs
15. Wingnut (do not remove)
16. Center Cone Burr
* included in grounds bin
2
8
9
11
5
4
10
7
6
1
3
20
10
30
16
5
12
14
134
15

Summary of content (2 pages)