Brochure

N100-4017 (2364-202)
66
© Copyright 2006 TAC. All Rights Reserved. F-27383-1
Low Differential Pneumatic-Electric Switch
Model Chart
Specifications
Typical Applications
Figure 1 Typical Application.
The pneumatic-electric switch features a SPDT
narrow differential switch which makes it suitable
for use with wide span pneumatic transmitters in
such applications as alarm initiation and outdoor
changeover of heating and cooling functions.
Features:
• Narrow-differential P.E. switch can be used with any type of
pneumatic transmitter to initiate an alarm caused by either
a high or low alarm condition.
• May be wall-mounted or panel-mounted where necessary
to keep wiring runs short.
Model No.
Wholesale
Model No.
Description
N100-4017 2364-202 Low differential pneumatic-electric switch.
Setpoint Adjustable fro 3 to 30 psig (21 to 207 kPa).
Switch action SPDT.
Switch rating 5A at 125 to 250 Vac.
Differential Non-adjustable, 0.25 psig (1.7 kPa) (lowest setpoint) to 0.7 psig (3.4 kPa) (highest setpoint).
Air signal pressure Clean, dry, oil free air required (refer. EN-123).
Maximum overpressure 200 psig (1380 kPa) above setpoint.
Connections
Air 1/8 in. MPT.
Electrical Coded screw terminals.
Environment
Locations NEMA 1.
Case 1/2 in. conduit connection.
Mounting Wall or panel.
Dimensions 4-3/8 x 3-1/2 x 2-13/16 in. (111 x 39 x 71 mm).
N100
-
401
(2364-20
2
M
C
NO
Wire to initiate alarm
on temperature increase
N100-4017Transmitter
N4-32