Brochure

PKSR-9001, PKSR-9002
Differential Pressure Transmitter
Model Chart
Specifications
For transmitting a fixed span 3 to 15 psig
(21 to 103 kPa) pneumatic signal which is
proportional to a differential pressure being
sensed. The output signal can be used as an input
for receiver-controllers or gauges for differential
pressure indication.
Features:
• Permits remote readout of differential water pressure on
receiver-gauge, and control from a convenient location.
• Provides differential pressure readout on a single receiver
gauge (eliminates need to read two pressure gauges and
subtract one reading from the other).
• Two different ranges permit proper match of transmitter
range to application.
• Field-adjustable “zero” adjustment.
Model No.
Wholesale
Model No.
Differential Pressure Sensed psi (kPa) Max. Differential Pressure psig (kPa)
PKSR-9001 2302-051
a
a
Includes one each 2 in., 2-12 in., and 3-1/2 in. gauge overlay in the appropriate range.
0 to 50
(0 to 345)
85 (586)
PKSR-9002 2302-101
a
0 to 100
(0 to 690)
150 (1034)
Transmitter Non-relay.
Construction Zinc die-cast case, brass fittings.
Sensed medium Water, air, steam, oil.
Maximum total pressure (any input) 300 psig (2069 kPa).
Zero adjustment Output to 3 r1/4 psig (21 r2 kPa) with input pressures equalized.
Output air signal 3 to 15 psig (21 to 103 kPa), span fixed.
Action Direct.
Environment
Ambient temperature limits
Shipping and storage: -40 to 140qF (-40 to 60qC).
Operating: 40 to 120qF (4 to 49qC).
Humidity 5 to 95% RH, non-condensing.
Supply air pressure Clean, oil free, dry air required (reference EN-123).
Nominal 20 psig (138 kPa).
Maximum 30 psig (207 kPa).
Connections 1/8 in. FNPT.
Air consumption for sizing air
compressor
27.6 scim (7.5 mL/s) at 20 psig (138 kPa).
Air capacity for sizing air mains 48 scim (13.1 mL/s) at 20 psig (138 kPa).
Mounting In any position with integral bracket provided.
Dimensions 2-11/16 H x 3-3/4 W x 1-19/32 D in. (68 x 95 x 40 mm).
PKSR
-
9001,
PKSR-
9002
F-27383-1 © Copyright 2006 TAC. All Rights Reserved. 77