Brochure

R533 (2373-501)
100
© Copyright 2006 TAC. All Rights Reserved. F-27383-1
TAC PNEUMODULAR
£
Multi-Input High and Low Selector
Relay
Model Chart
Specifications
The selector relay is a device designed for use in
pneumatic control systems where the application
requires the comparison, selection, and
transmission of the highest and/or the lowest of up
to six pneumatic input signals. All input ports are
“dead-ended” and no signal air passes through the
relay to the output ports.
Features:
• Six-input high and low pressure selector. Requires main air
connection.
• Highest of 6 inputs is output at Port H.
• Lowest of 6 inputs is output at Port L.
• Inputs numbered 1 through 6.
• All ports clearly labeled. Ports align with MCS-S terminals.
• TAC PNEUMODULAR: Mounts on two MCS-Socket(s) or
on one K502 Mounting Bracket.
Model No.
Wholesale
Model No.
Port Connections
Port Connected to
R533 2373-501
a
a
Includes two plastic mounting straps and adhesive backed mounting plates.
M Main air
L Lowest branch output
H Highest branch output
1 through 6 Input signals
Action Proportional.
Construction Glass-filled nylon.
Maximum ambient temperature 140qF (60qC).
Supply air pressure Clean, dry, oil free air required (Ref. EN-123).
Nominal 20 psig (138 kPa).
Maximum 30 psig (207 kPa).
Connections Barbed fittings for 1/4 in. O.D. polyethylene or 5/32 in. I.D. polyurethane tubing.
Air consumption 43 scim (11.8 mL/s).
Air flow capacity
HI output port 14.4 scim (3.9 mL/s).
LO output port 28.8 scim (7.8 mL/s).
Adjustments None.
Mounting
Designed for use on two MCS-S manifold sockets. This device can also be mounted by using the
optional K502 mounting bracket.
Dimensions 2 H x 4 W x 1-17/64 D in. (51 x 102 x 32 mm).
R533
(2373-501
M1 23456
L H