Brochure

T53-101 (2220-053)
Room Temperature Transmitter
Model Chart
Specifications
The temperature transmitter measures room
temperature and transmits a proportional
pneumatic signal to a calibrated receiver gauge
and/or receiver controller. The device is factory set
to transmit a 3 to 15 psig signal over a 50 to 90q
range.
Features:
• Permits remote readout and control of room temperature.
• Highly sensitive bimetal sensing element.
• Linear response to room temperature changes.
• Small size, attractive appearance.
• Matches appearance of T-Series 2 x 2 in. Thermostats,
H18-301 Humidistat, and H53-301 R.H. Transmitter.
• Field-adjustable “zero” adjustment.
Model No.
a
a
Order cover separately (C2-4x recommended).
Wholesale
Model No.
a
Description
T53-101 2220-053
b
b
Includes wall plate, (1) 1/4” x 3/16” reducer, 6” piece of plastic tubing, and mounting plate.
Refer to Specifications.
Action Direct acting, proportional.
Temperature Range 50 to 90qF (10 to 32qC), fixed.
Construction
Components Die cast aluminum, stainless steel, and glass-filled nylon.
Diaphragms Fabric-reinforced neoprene.
Air filter Internal.
Supply air pressure Clean, dry, oil free air required (Ref. EN-123).
Nominal 20 r0.5 psig (138 kPa).
Maximum 30 psig (207 kPa).
Connections For spring-reinforced 3/16 in. plastic tubing and required fittings (order separately).
Calibration point Refer to Figure 1.
Mounting Upright position on wall.
Dimensions 2-1/32 H x 2-1/32 W x 1-3/8 D in. (52 x 52 x 35 mm).
T53
-
10
(2220-
0
F-27383-1 © Copyright 2006 TAC. All Rights Reserved. 129