Brochure
TK-1071 Series, TK-1171
F-27383-1 © Copyright 2006 TAC. All Rights Reserved. 141
Accessories
Typical Applications
Figure 2 Typical Application.
Specifications (Continued)
Ambient limits
Shipping -40 to 150qF (-40 to 65qC). 0 to 98% R.H., non-condensing.
Operating 40 to 150qF (4 to 65qC). 10 to 98% R.H., non-condensing.
Supply air pressure Clean, oil free, dry air required (Ref. EN-123).
Nominal 20 psig (138 kPa).
Minimum 15 psig (103 kPa).
Maximum 30 psig (207 kPa).
Reset air pressure
Nominal 0 to 20 psig (0 to 138 kPa).
Maximum 30 psig (207 kPa).
Air connections
Main (black) 5/32 in. dia. spring reinforced plastic tube.
Reset and branch (white) 5/32 in. dia. spring reinforced plastic tube.
Air consumption for sizing air compressor
TK-1X71, TK-1071-116 13.8 scim (3.8 mL/s).
Aspirated models
a
41.5 scim (11.3 mL/s).
Air capacity for sizing air mains
TK-1X71, TK-1071-116 16 scim (4.4 mL/s).
Aspirated models
a
64 scim (17.5 mL/s).
Cover
Beige plastic as standard except aspirated models. Aspirated models have brushed stainless steel
covers.
Mounting Upright position on wall.
Dimensions 4-3/8 H x 2-3/4 W x 1-5/8 D in. (111 x 70 x 43 mm).
a
With the addition of AT-509 aspirating box.
Model No. Description
AT-11-600 Aspirating kit.
AT-61 Series Cover inserts.
AT-101 Lock cover kit.
AT-104 Dial stop pins. (NOTE: Pins included with each unit.)
AT-504 Plaster hole cover (small).
AT-505 Surface mounting base.
AT-506 Pneumatic wall box fitting.
AT-509 Wall box required for aspirated thermostats.
AT-536 Pneumatic wall thermostat conversion kit.
AT-546 Auxiliary mounting base.
AT-533-101 Adapter 1/4 in. plastic to 5/32 in. plastic.
AT-533-127 Adapter 3/16 in. copper or 1/4 in. copper with 1/4 in. solder coupling (not included) to 5/32 in. plastic.
AT-533-129 5/32" x 5/32" barbed brass connector.
TOOL-015 Spanner head driver for #6 spanner head screws.
TOOL-095-1 Pneumatic calibration tool kit.
BM
M
Reset
From Master
(Resetting) Controller
or Transmitter.
To Controlled
Device
TK-1071
TK-1171
Submaster Room
Thermostat