Brochure

AKS-1100
14
© Copyright 2006 TAC. All Rights Reserved. F-27383-1
Typical Applications
Figure 1 Typical Setpoint Adjuster Application.
NOTES: These apply to all receiver-controllers:
1. When internal restrictor is used, AKS-1100 must be located within 200 ft. (61 m) of receiver-controller.
2. When external restrictor is used, AKS-1100 must be located within 1000 ft. (305 m) of receiver-controller, and the
restrictor must be located within 200 ft. (61 m) of the transmitter (preferably at the transmitter’s location). Remove
internal restrictor from receiver-controller and install blocking gasket.
Accessory Scale Plates (must be ordered separately).
Model No. Description For Use with the Following Transmitters
AKS-1129 r5qF Scale TKS-5001, TKS-6001, T150-1062, T150-1073
AKS-1130 Closed Open
Actuators
AKS-1131 Open Closed
AKS-1149 r5.5qC Scale T150-1011, -1012, -1013, -1021, -1022, -1023, -1082, -1083
AKS-1169 r20qF Scale T150-1031, T150-1035
AKS-1189 r8% R.H. Scale HKS-2033, -5033
AKS-1199 r2 in. Water Scale HKS-2033, -5033
Shown with Internal Restrictor.
AKS-1100
Shown With External Restrictor.
B
A1M
2
M
N100-0010
1 2
RKS-3002
RKS-4002, RKSR-4000
Receiver Controller
AKS-1100
B
A1M
2
RKS-3002
RKS-4002, RKSR-4000
Receiver Controller