User Guide

AV-392 or AV-394 Valve Linkage for Obsolete 1-1/2" to 2"

VB-9XXX Valve Bodies

1. Mount the bracket onto the valve body as follows:

a. For Style A VB-9XXX valve bodies, mount the bracket on the valve body by

screwing the mounting nut into the mounting bracket. Tighten the hex mounting nut,

using a 1-5/8" open-ended wrench with a maximum thickness of 3/16" (TOOL-37).

See Figure-1.

b. For Style B VB-9XXX valve bodies, mount the bracket onto the valve body by

removing the bracket nut, placing the bracket on the valve body, and replacing and

tightening the valve bracket nut. See Figure-2.

Figure-2 Valve Linkages for Obsolete 1-1/2" to 2" VB-9XXX Valve Bodies.