Selection Guide
Table Of Contents
- 1. Determine the manufacturer, part number, size, and stroke of the competitive valve body.
- 2. Determine the type of actuator required (e.g. pneumatic, electric two-position, electric floating, electric proportional), th...
- 3. Consult the appropriate section of this selection guide to determine the required AV-8xx kit number, compatible TAC actuator part number, and TAC actuator linkage (if needed).
- Competitive Globe Valve Adapters
- AV-800 Series Application Overview
- 1. TAC actuator and adapter dimensions may need to be checked to assure proper clearances are maintained.
- 2. The replacement actuator and adapter listed represent what TAC believes are an equivalent. Actuators do not necessarily have ...
- 3. TAC assumes no responsibility for guaranteeing the acceptability of any suggested replacements. The suggestions contained herein should only be used as a guide.
- 4. Consult the valve manufacturer if the system pressures or temperatures are being changed to assure proper performance.
- 5. Pneumatic actuator close-offs are based on 20 psig to the actuator diaphragm
- 6. All specified close-offs are nominal, and can vary based on the age of the valve, tightness of the stem packing, and variations in stem drag
Printed in U.S.A. 4-09 © Copyright 2009 TAC. All rights reserved. F-27470-3
Selection Guide
AV-8xx Series Adapter Kits
TAC AV-8xx Series Adapter Kits mount on the bonnet
of competitors’ valves to allow replacement of the
actuator with an appropriate TAC pneumatic,
DuraDrive™, or Forta™ actuator. The replacement
TAC actuator is then installed using its standard
mounting procedure and hardware.
Actuators with integral linkages, such as TAC
DuraDrive Mx51-710x (105 lb
f
), mount directly on the
TAC adapter. Other actuators, such as the MK-2690
(6 in
2
) pneumatic actuator, use their standard linkage
kit (e.g. MK-2690 uses the AV-7400 for valves with
1
/
2
”
of stroke).
AV-800 Series
Competitive Globe Valve Adapters
AV-802 Adapter on Johnson Controls Globe Valve
Kit Part
Number
Kit Description
Literature
F Number
AV-801
Adapter Kit for Johnson Controls™
1
/
2
” to
3
/
4
” VG7xxxxT Two- and Three-Way
Globe Valves
F-27396
AV-802
Adapter Kit for Johnson Controls
1
/
2
” to
3
/
4
” VG7xxxxS, VG7xxxxT, and VTM
Two- and Three-way Globe Valves
F-27427
AV-803
Adapter Kit for Johnson Controls
1
/
2
” to 2” VG7xxxxx, VB-3754, VB-3974,
VB-4322, and VB-4324 Two- and Three-Way Globe Valves
F-27431
AV-810
Adapter Kit for Honeywell™
1
/
2
” to 3” V5011, V5011F, V5011G, V5011N, V5013,
V5013F, V5013G, and V5013N Two- and Three-Way Globe Valves
F-27433
AV-811
Adapter Kit for obsolete Barber-Colman VB-9000 Series 1/2” to 2” Two- and
Three-Way Bronze Globe Valves
F-27442
AV-812
Adapter Kit for VB-8000 and obsolete Barber-Colman VB-9000 Series 2-1/2” to
6” Two- and Three-Way Iron Flanged Globe Valves
F-27443
AV-814
Adapter Kit for Siemens™ 599-03xx Flowrite™ Series
1
/
2
” to 2” Two- and
Three-Way Globe Valves
F-27444
AV-815
Adapter Kit for Siemens 658-00xx or 658-01xx Powertop™ Series
1
/
2
” to 1
1
/
4
”
Two- and Three-Way Globe Valves
F-27445
AV-816
Adapter Kit for Siemens (Landis & Gyr/Powers™) 591-6xxx and 591-7xxx
1
/
2
”
and
3
/
4
” Two-Way and 1
1
/
4
” to 2” Three-Way Globe Valves
F-27446
AV-817
Adapter Kit for Robertshaw™ , V61xx, V62xx, V63xx, V64xx, V65xx, V66xx,
V67xx, V68xx, V69xx,V2566, V2567, V2568
1
/
2
” to 2” Globe Valves
F-27447
AV-7800
Pneumatic Actuator Linkage Kit for MK-2690 to provide
3
/
4
” stroke for
competitive globe valves (requires AV-801, AV-802, AV-803, AV-815, or AV-816
ordered separately).
F-27432