User Guide

All brand names, trademarks and registered

trademarks are the property of their respective

owners. Information contained within this

document is subject to change without notice.

F-16290-7

www.tac.com

TAC

1354 Clifford Avenue

P.O. Box 2940

Loves Park, IL 61132-2940

4. Insert the dial stop pin in the appropriate hole on either (or both) side(s) of the control

dial to restrict dial rotation.

Figure-6 Dial Stop Pin Insertion.

Maintenance

Open areas at bottom and around base of thermostat should be kept clean and free from

obstructions to allow proper flow of air. If switch contacts need cleaning, this may be done

with a contact burnishing tool (TOOL-13).

Field Repair

These thermostats are not field repairable. Replace the entire device.

Dimensional Data

All dimensions are in inches (millimeters in brackets). See Figure-7.

Figure-7 Mounting Ring Dimensions.