User Guide

10 Copyright 2007 TAC All Rights Reserved. F-27086-7
2-Way Ball Valve Assemblies Using TAC DuraDrive Actuators
Note: All valve sizes — ANSI Class IV (0.01% of C
v
) shut-off
Table-6 Selection Chart—2-Way Ball Valve Assemblies with Tac DuraDrive Actuators.
Non-Spring Return
a
a
Non-spring return 2-way ball valve assemblies are shipped open, voltage rise to close.
Spring Return
Actuator Models (Actuator Codes)
24 Vac 24 Vac 24 Vac
Floating
MF4D-6083
Proportional
MS4D-6083 (841) to (849)
Floating
MF4E-60830-100 (880)
Two-Po sit ion
MA4D-7033 (N.O.) (821)
MA4D-8033 (N.C.) (831)
Floating
MF4D-7033 (N.O.) (821)
MF4D-8033 (N.C.) (831)
Proportional
MS4D-7033 (N.O.) (821) to (829)
MS4D-8033 (N.C.) (831) to (839)
120 Vac
Two-Po sit ion
MA4D-7030 (N.O.) (815)
MA4D-8030 (N.C.) (817)
230 Vac
Two-Po sit ion
MA4D-7031 (N.O.) (816)
MA4D-8031 (N.C.) (818)
Valve Assembly
Part Number
Valve Size
(in.)
P
Code
b
b
To find the corresponding flow coefficients for these port codes, refer to "Port Codes for TAC DuraDrive Ball Valve Assemblies" on page 6.
Close-Off Pressure, psi (kPa)
Ball
Valve Assembly
Vx-2213-8xx-9-P
c
Valve/Linkage
Assembly
VB-2213-500-9-P
c
To determine a specific part number, identify the actuator’s control signal type (“A,” “F,” or “S”), actuator code, and P code. Refer to "Part Numbering System" on
page 5.
1
21, 22, 23, 24,
25, 26, 27
100 (689) 100 (689) 100 (689)
1-1/4
41. 42, 43, 44,
45, 46
70 (482) 70 (482) —
1-1/2 51, 52, 53, 54
70 (482) 70 (482) —
2
61, 63, 65, 66,
67
70 (482) 70 (482) —
2-1/2
71, 72, 73, 74,
75, 76
70 (482) 70 (482) —
382, 85
70 (482) 70 (482) —
Non-Spring Return
VF-2213-880-9-P
Spring Return
Vx-2213-81x-9-P
Vx-2213-82x-9-P
Vx-2213-83x-9-P
Non-Spring Return
Vx-2213-84x-9-P