User Manual

6
How to Get Into Each Mode
Handheld Camera Stabilizer Mode
continued…
3) Remove the quick release plate from
the head and attach it to your camera.
Attach the quick release plate to your
camera. (Or attach your optional offset
balance plate to your camera, then to
the quick release plate)
Make sure the latch is properly pressed
all the way over so that the quick release
plate is secured correctly to the head.
Double check that all knobs on the head
are secured firmly.
4) Now pick up the STEDDIEPOD with
your camera attached, and hold the
STEDDIEPOD horizontally with one hand
with your palm facing upwards.
3a
a
3b
4a
3c
* You can also use the optional offset
balance plate to change the balance
point of your camera. Simply attach it
to your ¼-20: hole changing the
balance point to where you need it.
*
*
*