Owners manual
Install Instruction
A×1 I×1
① ②
B×1 J×2
C×1 K×4
D×1 L×2
③ ④
E×1 Mx4
F×1 Nx1
Gx1
Hx1
Firstlyassembleallscrews,thentightenonebyone!!!
Remark:1、Some bolts have been installed on the corresponding holes. You can put the bolts down and re-fix them according to the instructions.
2、This product can be 360 degree swivelled,and to lock at any position,pull up picture #C.
3、You can adjust the height of the barber chair by stepping on picture #C.To adjust the barber chiar higher, step down picture #C half-way
(NOTE:do not step down fully),then the chair will get higher bit by bit as you step down couple times. To adjust the barber chair lower,step down
picture #C fully (NOTE:in order to lower the barber chair,there must be someone sitting on the chair as a weight pushing down the chair.)
(A)
(B)
(C)
(M)
( (
(K)
(E)
(D)
(G)
(F)
(J)
(H)
(I)
(L)