Product Specs

DUAL PAIR
EARBDS N CASE
-1x Pair of Noise Cancellation Earbuds
-1x Pair of TWS Earbuds
-1x Charging Cradle
Included:
Charging:
-1x USB Type-C Charging Cable
-1x Packet of earbud cushions including small,
medium, and large sizes.
The Bluetooth Earbuds packs two sets of
wireless earbuds into one powerful charging cradle.
Please fully charge before first use.
Charging the Earbuds
To charge earbuds, place them in the charging
cradle. The earbuds’ LED lights will show red when
charging and will turn off once fully charged.
When the charging cradle becomes very low on
power, the charging cradle indicator LED will glow
white and flash rapidly.
Auto-Pairing
Remove one pair of earbuds from the charging case
and the earbuds’ LED indicator lights will flash blue
and red and will begin auto-pairing with each other.
When you hear, “TWS connected,” they have
successfully paired together.
One earbud will function as the primary earbud and
its LED will flash red and blue. The LED on the
secondary earbud will remain off.
Connecting to Your Device
Remove one pair of earbuds from the charging
cradle, allowing them to auto-pair as described
above. Once auto-pairing has completed, turn
Bluetooth on for your device and search for and
connect to the earbuds.
Pairing Names
Noise Cancellation Earbuds: RT40-A.
TWS Earbuds: RT40-B.
Once pairing has completed, you will hear, “device
connected,” from both earbuds.
To Turn the Earbuds Off:
-Return the earbuds to the charging cradle.
-Touch the right or left earbud for five seconds.
If the earbuds do not connect to a device withing five
minutes of being powered on, they will automatically
power off to save battery.
Multi-Function Touch Controls
Use the volume controls on your device to adjust the
volume of the earbuds.
Media:
Play / Pause: Tap the left or right earbud twice.
Next Song: Tap the right earbud three times.
Previous Song: Tap the left earbud three times.
Incoming Calls:
-To answer a call, tap the right or left earbud twice.
-To reject a call, touch the right or left earbud for two
seconds, until you hear a prompt indicating the call
has been rejected.
The Noise Cancelation Earbuds feature
Active Noise Cancelation (ANC) technology. To
active or deactivate ANC, touch the right earbud for
two seconds, until you hear “noise canceling on/off.”
Activating a virtual assistant:
-Noise Cancelation Earbuds: Touch the
left earbud for two seconds until you hear the
assistant prompt.
-TWS Earbuds: Touch the left or right
earbud for two seconds until you hear the assistant
prompt.
Charging the Charging Cradle
To recharge the charging cradle, plug the provided
charging cable into the unit and a power source of at
least 1A. While charging, the LED indicator light will
glow red. When fully charged, the LED indicator light
will turn off.
Using the Earbuds:
Charging Cradle
Battery Capacity: 500mAh 3.7V
Recharge Time: 2 Hours
Noise Cancellation Earbuds
Bluetooth Version: 5.3
Power Output: 3mW
Speaker Size: D13mm*2
Frequency Response: 20HZ - 20KHZ
Battery Capacity each Earbud: 40mAh
Play Time: 6 Hours without ANC; 5 Hours with ANC.
TWS Earbuds
Bluetooth Version: 5.1
Power Output: 3mW
Speaker Size: D13mm*2
Frequency Response: 20HZ-20KHZ
Battery Capacity each Earbud: 25mAh
Play Time: 4 Hours
Recharge Time: 1.5 hours.
Product Specifications:
RT40-A
Noise Cancellation Earbuds
RT40-B TWS Earbuds
材质：128G铜版纸 正反面印刷 成品尺寸：55x100mm（三折页）
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modifications to this unit not
expressly approved by the part
responsible for compliance could void the user’s
authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF
exposure requirement.
The device can be used in portable exposure
condition without restriction.
FCC ID: 2ATOY-RT40-A
FCC ID: 2ATOY-RT40-B