Butterfly Trike Model Number: 72639 Instructions Please keep these instructions for future reference. Adult assembly is required. Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood. If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store. Age: 2 - 5 years. Weight Limit: 55 lbs.
WARNING • Adult supervision is required. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. Parts Handlebar Seat Frame Straight Axle 2 Washers 2 Rear Wheels 2 Hubcaps Fork 2 Cap Nuts 2 Fork Covers 2 Lock Washers Pedal Axle 2 Pedals Front Wheel 4 Pedal Hubs #8 x 3" Screw – 1 Cap Nut – 2 Washer – 2 #8 x 3/4" Screw – 4 Fisher-Price, Inc., a subsidiary of Mattel, Inc.
Assembly • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • If you are missing a part, please call us toll-free at 1-800-432-KIDS, rather than return this product to the store. • Please wipe each part with a clean, dry cloth before assembly. 2 Washer Straight Axle Rear Wheel CAUTION Please keep small parts, hardware and plastic bags out of children’s reach. Dispose of plastic bags properly.
Assembly 4 5 Indented Side Up Pedal Hub Metal Tab Pedal Axle Cap Nut Hubcap Metal Tab Rear Wheel Slot Pedal Hub Washer Straight Axle • Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal axle cover. Frame 6 Pedal Hubs Pedal Axle Assembled Rear Wheel Front Wheel Scrap Block of Wood Hole Bottom View • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
Assembly 8 Pedal Hub 11 Pedal Axle Lock Washer (Inside) Pedal Pedal Axle Pedal Hub Front Wheel Assembly • Turn the front wheel assembly over. • Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel. • Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel. 9 Scrap Block of Wood • Place a scrap block of wood under the front wheel assembly. • Fit a pedal on the pedal axle.
Assembly 13 14 Handlebar Pegs Seat Holes Frame Neck Fork Post • At an angle, insert one peg on the back of the seat into the hole in the rear of the frame. • Insert and snap the other peg on the back of the seat into the other hole in the rear of the frame. Fork Cover One-time assembly is now complete. #8 x 3" Screw – 1 SHOWN ACTUAL SIZE • Turn the frame upright. • Insert the fork post up through the hole in the neck of the frame.
Label Decoration Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils. • For best results, avoid applying a label more than once. • Apply the labels as shown in the illustrations below. • After applying a label, rub the label firmly with a cloth to make sure the label is adhered to your vehicle.
Maintenance • Check plastic parts regularly and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean the trike, use a mild soap and water solution and a clean cloth. Rinse clean with water to remove soap residue. Consumer Information Questions? We'd like to hear from you! Call Fisher-Price® Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.