CD Player User Manual

POWER SOURCES
7
This CD player requires either six (6) “D” batteries (not included) or an AC
adapter (included).
BATTERY INSTALLATION
1. Remove the Battery Compartment door
located on the bottom of the unit by
pushing in on the tabs and lifting the
door off.
2. Insert
six (6) “D” batteries (not included)
according to the polarity diagram inside
the Battery Compartment. Alkaline batteries are recommended for the
longest playing time.
AC OPERATION
To operate the unit using AC power, connect an
AC adapter (included) to an AC outlet having 100-
240V, 60Hz AC. Plug the small end into the
DC
9V IN
y
jack on the rear of the unit and
connect the other end into the AC outlet. The
batteries are automatically disconnected when
the AC adapter is used.
CAUTION: When not using AC power, disconnect
the AC adapter from the wall outlet by pulling the plug (not the cord). Do not
touch the AC adapter with wet hands. Fully insert the plug without exposing
any part of the blade.