User Guide

19
T8396pr-0920
Main Reset
Power
Volume
Scan
Reset
Scan
Help your child practice steering to learn how far and
how quickly to turn the steering wheel when driving, and
automatically knows how to stop.
• Your vehicle has a patented, electronic braking system
that automatically stops the vehicle when your child’s
foot lifts from the pedal.
Before you disconnect the high speed lock-out, make
sure your child knows how to steer, start and stop the
vehicle, and knows the safe driving rules. When the
high speed lock-out is disconnected, the vehicle can
be driven forward in low (2½ mph, maximum) or high
speed (5 mph, maximum).
Make sure the shifter is in the reverse
position.
Loosen and remove the screw in the shifter box.
Replace the lock-out screw into the hole in the shifter
for future use. It can be re-inserted into the shifter box
to lock-out high speed.
Make sure the shifter is in the high speed position.
Press down on the foot pedal.
VEHICLE OPERATION
Beginner Use – Low Speed
Advanced Use – High Speed
Stop
• Make sure the shifter is in the low speed
position.
• Press down on the foot pedal
2
.
IMPORTANT! To avoid damaging the motors and gears,
stop the vehicle before shifting from forward to reverse.
• Make sure the shifter is in the reverse position.
• Press down on the foot pedal. The vehicle is
designed to operate in low speed only in reverse.
Shifter
Lock-Out Screw
Storage
Position
Lock-Out
Position
FM Radio
Press the power button to turn on or off.
Turn the volume dial
to adjust the volume.
Hint: The FM Radio will turn off automatically after
about one hour of non-use.
Press the scan button to find a station. Press it
again to change the station.
To reset the radio to the first station, press the scan
reset button .
FM Radio reception varies by area. If the tuned station
is lost due to poor reception, the radio automatically
scans to the next available station.
Hint: Each time power is turned off and back on, the FM
Radio will reset to the first station.
IMPORTANT! If the FM Radio functions erratically, press
the main reset button with the point of a pen (or similar
object).