Installation Guide

KITCHEN STRAINER
INSTALLATION INSTRUCTIONS
P 847•244•1234 www.barclayproducts.com
12/22/2020
Parts Included
• 1 Strainer • 1 Basket • 1 Rubber Gasket • 1 Drain Body • 1 Brass Nut • 1 Flange Tailpiece •
Tools Needed
• Silicone Sealant • Wrench •
1. Remove strainer and basket from drain body.
2. Unscrew brass nut and flange tailpiece from
basket.
3. Apply silicone sealant under the rim of
basket.
4. Place basket in sink opening and
press down firmly.
5. From beneath sink, place rubber gasket and
drain body over basket and push to top
firmly.
6. Screw brass nut onto basket, and tighten
until secure.
7. Screw flange tailpiece back on basket
bottom. You will need it when you connect
your plumbing.
Strainer
Rim
Basket
Rubber
Gasket
Drain Body
Brass Nut
Flange
Tailpiece