Installation Guide

INSTALLATION INSTRUCTIONS

P 847•244•1234 www.barclayproducts.com

8/8/19

Bath

Accessories

Tools Needed

• Drill • Pencil • Tape Measure • Screwdrivers • Level • Stud Finder

1. Hold accessory to desired location on

wall. Mark wall for mounting brackets.

2. Drill holes for mounting brackets and

insert anchors.

3. Screw mounting brackets securely to

wall.

4. Place accessory over mounting bracket.

5. Secure accessory to bracket using set

screws and allen wrench provided.

If any accessory arrives with the mounting bracket already assembled to the unit remove the

bracket from the unit before following the installation steps.

PAGE 1
Bath Accessories INSTALLATION INSTRUCTIONS Tools Needed • Drill • Pencil • Tape Measure • Screwdrivers • Level • Stud Finder If any accessory arrives with the mounting bracket already assembled to the unit remove the bracket from the unit before following the installation steps. 1. Hold accessory to desired location on wall. Mark wall for mounting brackets. 2. Drill holes for mounting brackets and insert anchors. 3. Screw mounting brackets securely to wall. 4. Place accessory over mounting bracket. 5.