Installation Guide

8-20-19
Freestanding
Tub Fillers with
Hand Showers
INSTALLATION INSTRUCTIONS
Tools Needed
Adjustable Wrench • Slip Joint Pliers • Teflon Pipe Tape • Philips Screwdriver
Parts Included
• 1 Freestanding Filler • 1 Handshower with Hose • 1 Cover Plate • 2 Flexible Hoses
3 Feed Flexible Hoses (4)
through Faucet Body
Tube (8) and thread
securely on to faucet
connections.
4.Thread the Faucet
Body Tube (8) on to the
Faucet Body (2).
6.Connect the
Handshower Hose (6)
to both the Handshower
and Faucet Body (2).
Turn on water to test
connections.
5.Tighten the Mounting Base (5) to the
floor. Connect the Flexible Hoses (4)
to the hot and cold water supplies.
Hot and cold water lines will rough in
just above the finished floor. Exact
height to ber determined on site.
Cleaning Instructions
Wipe this whole set off with warm water and a soft cloth. DO NOT use soaps, cleansers, or brass cleaners as they will
disintegrate the protective lacquer coating and leave the brass exposed causing it to tarnish.
Pg. 2
Models: 7903, 7960, 7962,
7964, 7968, 7972