Specification

ManualsBrandsBarclay Products ManualsBath5.58 ft. Cast Iron Roll Top Bathtub Kit in White with Polished Chrome Accessories

CADMUS

68” CAST IRON

Cat. No.

ROLL TOP TUB

CTR7H67

WITH 7” DECK HOLES

Features:

►Inside finish is white enamel

►Cast Iron ball and claw feet available in 8 finishes

or unfinished

►Tub exterior is white (epoxy)

►7” centers in tub deck

►Non-skid strips

►Feet attached and leveled before shipment

►Tub thoroughly inspected before shipment

Features:

►Inside finish is white enamel

►Cast Iron ball and claw feet available in 8 finishes

or unfinished

►Tub exterior is white (epoxy)

►7” centers in tub deck

►Non-skid strips

►Feet attached and leveled before shipment

►Tub thoroughly inspected before shipment

llon Capacity: 57

Shipping Weight: 502 lbs.

Empty Weight: 309 lbs.

Filled Weight: 785 lbs.

L: 68”

W: 30-½”

H: 23-¼” (from floor to top of tub)

18-⅝” (from bottom of tub to top

of tub)

P 847•244•1234 www.barclayproducts.com

/26/2018

Dimensions of fixture are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. Dimensions and

specifications subject to change without notice.

Foot

Finishes:

UF Un

finished

BL Painted Black

BQ Painted Bisque

PB Polished Brass

The following is recommended for

CTR7H67 tubs with deck holes:

•Rim-mounted faucet: part #4601 or 4201

•Straight bath supplies: part #5577

•Leg tub drain: part #5599

•Complete shower unit: part #4063

Custom Colors Available (inside of tub is always white enamel):

Painted bathtubs are considered “special order” and are not returnable

$160 Bisque or Black $250 Designer Color

Polished Chrome

WH Painted White

PN Polished Nickel

SN Brushed Nickel

ORB Oil Rubbed Bronze

Summary of content (4 pages)

PAGE 1
CADMUS 68” CAST IRON ROLL TOP TUB WITH 7” DECK HOLES Cat. No.
PAGE 2
TUB FILLER WITH DIVERTER, HANDSHOWER SHOWERHEAD & RING Cat. No. 4063 Features: ►Elephant spout has a flow rate of 3.7 GPM ►Telephone style handshower with cradle and 59” hose ►Backflow preventor in handshower ►Sunflower showerhead has flow rate of 2.44 GPM ►Includes 62” riser and rectangular shower rod ►6” Elbow mounts included ►¼ Turn ceramic disc cartridges ►7” Centers for deck mounting installation on acrylic or cast iron tubs ►Flow rate for handshower is 2.
PAGE 3
STRAIGHT BATH SUPPLIES Cat.No. 5577 Features: ►For use with faucets mounted to the tub deck ►No stops ►½” Compression inlet Compliance Certification ►¾” Compression outlet Meets or exceeds the following specifications: ASME-A112 ►Bottom flange 2-½” diameter (and 19.6M) for Vitreous china ►0.500” Outer diameter fixtures. ASME 112.19.9M for fire clay fixtures. ►0.400” Inner diameter ►0.
PAGE 4
LEG TUB DRAIN Cat. No. 5599 Features: ►Twist-and-lift stopper ►Includes deep escutcheon ►Height adjustable 15”-18” ►Depth adjustable 12”-14” ►Includes deep escutcheon ►IAPMO approved ►Available in 5 Finishes Finishes: CP BP SN PN ORB Polished Chrome Polished Brass Brushed Nickel Polished Nickel Oil Rubbed Bronze Escutcheon Height: 1-¼” Dimensions and specifications subject to change without notice. 09/21/2018 P 847•244•1234 www.barclayproducts.