Dimensions Guide

60” CAST IRON Cat. No.

ROLL TOP TUB CTR60

Features:

►Inside finish is white enamel

►Cast Iron ball and claw feet available in 6 finishes or

unfinished

►Tub exterior is white (epoxy)

►3 3/8” centers in tub wall

►Non-skid strips

►Feet are attached and leveled before shipment

►Tub is thoroughly inspected before shipment

Gallon Capacity: 40

Shipping Weight: 500 lbs.

Empty Weight: 287 lbs.

Filled Weight: 622 lbs.

L: 60 3/4”

W: 30 1/2”

H: 23 1/4” (from floor to top of tub)

18 5/8” (from bottom of tub to top

of tub)

P 847•244•1234 www.barclayproducts.com

Meets or exceeds the following

specifications: A112-19-1M 1994.

10/16/2014

Dimensions of fixture are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. Dimensions and

specifications subject to change without notice.

Foot Finishes:

BP Polished Brass

CP Polished Chrome

PN Polished Nickel

SN Brushed Nickel

WH White

ORB Oil-rubbed Bronze

The following is recommended for CTR60

tubs with faucet holes:

•Tub wall-mounted faucets or hand-held

showers: part# 4022, 4025 or 4035

•Tub wall-mounted faucets for use with

risers: part# 4001, 4023, 4030 or 4031

•Double offset bath supplies: part #5576

•Leg tub drain: part #5599

•Complete shower unit: part# 4124, 4143

Custom Colors Available (inside of tub is always white enamel):

Painted bathtubs are considered “special order” and are not returnable

$160 Bisque or Black $250 Designer Color

PAGE 1
60” CAST IRON ROLL TOP TUB Cat. No. CTR60 Features: ►Inside finish is white enamel ►Cast Iron ball and claw feet available in 6 finishes or unfinished ►Tub exterior is white (epoxy) ►3 3/8” centers in tub wall ►Non-skid strips ►Feet are attached and leveled before shipment ►Tub is thoroughly inspected before shipment L: W: H: 60 3/4” 30 1/2” 23 1/4” (from floor to top of tub) 18 5/8” (from bottom of tub to top of tub) Meets or exceeds the following specifications: A112-19-1M 1994.