User's Manual

stored in a retrieval system without the pr ior written consent of BA RCO.

Guaran tee and Compensation

Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchaser

must im mediately inspect all delivered goods for dam age incurred during transport, as well as for material and manufacturing faults Barc o

must be informed immediately in wr iting of any c omplaints.

The pe riod of guarantee begins on the date of transfer of risks, in the case of spec ial systems and softwar

e on the date of c omm issioning,

at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can r epair the fault or p rovide a replacement

at its own discretion w ithin an appropriate period. If this m easure proves to be impossible or unsuccessful, the purchaser ca n deman d a

reduction in the purchase price or cancellation of the c ontract. All o ther claims, in particular t

hose relating to compensation for direct or

indirect damage, and also damage attributed to the operation of s oftware as well as to other services provided by Barco, b eing a component

of the system or independent service, will b e deemed invalid provided the damage is n ot proven to be attributed to the absenc e o f properties

guaranteed in writing or due to the intent or gross negligence or part of Barco.

If the purchaser or a third party carries out modifications or repairs on good delivered by Barco, or if the goods are handled incorrectly,

in particular if the systems a re commissioned operated incorrectly or if, after the transfer of risks, the goods are s ubject to influences not

agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee cove rage a re

system failures which are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as

well as norma l maintenance a re not subject to the guarantee provided by Bar co either.

The environmental conditions as well as the servicing and m aintenance regulations s pecified in the this manual must be complied with by

the c ustomer.

Changes

Barco provides this manual “as is” without war ranty of any kind, either expressed or implied, including but not limited to the im plied war-

ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the

program(s) described in this publication at any time w ithout notice.

This pub lication could contain technical inacc uracies or

typographical errors. Changes are periodically m ade to the information in this

publication; these c hanges are incorporated in new editions of this publication.

Trademarks

Brand and pr oduct names mentioned in this m anual may be trademarks, registered trademarks or c opyrights of their respective holders.

All brand and product names me ntioned in this manual serve as com men ts or ex amples and are not to be understood as adv ertising for

the products or their m anufactures.

Federal Communication Commission (FCC Statement)

This equipment h as been tested and found to c omply with the limits for a class B digital device, pursuant to Par t 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential

environment. This equipm ent generates, uses, and can radiate radio frequency energy and, if not ins talled a nd used in accordance with t he

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harm ful interference in w hich case the user is encouraged to try to correct the interference by one or more of the following measures.

Introduction to the user :

If this equipment does cause interfere

nce to radio or television reception, the user m ay try to correct the interference by one or more of the

following measures :

• Re-orientation of the receiving antenna for the radio or television.

• Relocate the equipment with respect to the receiver.

• Plug the equipment into a different outlet s o that the equipme nt a nd receiver are on different branch circuits.

• Fasten cables connectors to the equipment by mou nting screws.

The use o f shielded cables is required to comply w ithin the limits of Part 15 of FCC rul es an d E N55022.