User's Manual

302 Encore Presentation System • User’s Guide • Rev 04
7. Operations
Prerequisites
mêÉêÉèìáëáíÉë
Prior to reviewing this chapter, please ensure the following:
• All system destinations are properly configured. In Chapter 6, refer to the
“
Destination Setup" section on page 277 for details.
• All system inputs (sources) are properly configured. In Chapter 6, refer to the
“
Input Setup" section on page 293 for details.
• All system backgrounds are properly configured. In Chapter 6, refer to the
“
Background Setup" section on page 291 for details.
• The DSK is properly configured. In Chapter 6, refer to the “DSK Setup" section
on page 296 for details.
• Ensure that you are familiar with the Controller. In Chapter 4, refer to the
“
Controller Orientation" section on page 107 for details.
• Ensure that you are familiar with all menus. In Chapter 5, refer to the following
sections for details:
~ Refer to the “PIP Adjustment Menu" section on page 213 for details on
all PIP adjustment menu items.
~ Refer to the “Key Menu" section on page 224 for details on all Key
adjustment menu items.
~ Refer to the “Source Adjustment Menus" section on page 232 for
details on all input source adjustment parameters.
Tip
As you review each function, it is recommended that you
practice each feature on the Encore itself — using a fully
configured system consisting of Program and Preview
monitors, projector(s), and all the required destinations,
sources and backgrounds.
Note
In this chapter, when a sequence of menu selections is
required to complete a given procedure, the "
>" symbol is
used to divide each successive menu pick.
S To access the Genlock Menu, press
OUTPUT > {GLCK}.