User's Manual

2. Xenon bulb lamp replacement process
2.4 Installation of t he lamp house
WARNING: This procedure may only be performed by qualified technical service personnel.
CAUTION: Due to its high internal p ressure, the lamp may exp lode in either hot o r cold states if imp roperly
handled.
Necessary tools
7mmflat screw driver.
How to install the lamp house of the projector ?
1. Ensure the projector is sw itched off.
2. Remove the lamp cover.
3. Hold fast the lam p house by its handles and gently slide the lamp house into its s ock et. Note that the compartment is provided
with guides (G) t o position the lamp house correctly.
G
C
Image 2-17
4. Push the lamp house forward until it s lides fully into the projector.
5. Secure the c orrect position of the lamp house by tightening all three spring lock sc rews as illustrated.
Image 2-18
6. Reinstall the lamp cover of t he projector.
18
R59770175 XENON BULB LAMP REPLACEMENT 24/09/2008